Magtek USB MagnePrint Swipe Reader with Encryption Bedienungsanleitung PDF herunterladen (Seite 47)

Section 4. USB Communications

Example Set POST_CARD_STRING property Request (Hex):

Cmd Num Data Len Prp ID Prp Value

01 04 12 31 32 33

Example Set POST_CARD_STRING property Response (Hex):

Result Code Data Len Data

00 00

Example Get POST_CARD_STRING property Request (Hex):

Cmd Num Data Len Prp ID

00 01 12

Example Get POST_CARD_STRING property Response (Hex):

Result Code Data Len Prp Value

00 03 31 32 33

SS_TK1_ISO_ABA PROPERTY (KB)

Property ID: 20 (0x14)

Property Type: Byte

Length: 1 byte

Get Property: Yes

Set Property: Yes

Default Value: 0x25 ‘%’

Description: This character is sent as the track 1 start sentinel for cards that have track 1

encoded in ISO/ABA format. If the value is 0 no character is sent. If the

value is in the range 1 – 127 then the equivalent ASCII character will be sent.

This property is stored in non-volatile memory, so it will persist when the unit

is power cycled. When this property is changed, the unit must be reset (see

Command Number 2) or power cycled to have these changes take effect.

SS_TK2_ISO_ABA PROPERTY (KB)

Property ID: 21 (0x15)

Property Type: Byte

Length: 1 byte

Get Property: Yes

Set Property: Yes

Default Value: 0x3B ‘;’

Description: This character is sent as the track 2 start sentinel for cards that have track 2

encoded in ISO/ABA format. If the value is 0 no character is sent. If the

value is in the range 1 – 127 then the equivalent ASCII character will be sent.

This property is stored in non-volatile memory, so it will persist when the unit

is power cycled. When this property is changed, the unit must be reset (see

Command Number 2) or power cycled to have these changes take effect.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 71 72

Keine Kommentare

Magtek USB MagnePrint Swipe Reader with Encryption Bedienungsanleitung Seite 47